Equipment & System

To realize complete and unique systems and switchboards in remote control, our DC UPS is the best solution. If you are in the Oil & Gas, water purification, water level control, remote control and pollution sector, make your system better with our power supplies and battery charger ranges.


Redundancy Module

Module for connecting to Redundant Power Supplies and DC UPS All-In-One

» Datasheets and Manuals Scarica File Allegati
Non-isolated DC/DC STEP-UP Unit

Main features:

  • Input: 12 Vdc
  • Output: 24 - 30 - 40 - 48 - 60 Vdc
  • Output In: 3 A ÷ 6 A
  • Adjustable output ±10%
  • Ambient temperature operation field: 0 - 50° C
  • IP20

The low voltage power supplies/converters in the STEP-UP range are suitable for producing voltages higher than the input voltage. They are typically used for currents of 3-6A, in cases where there is a rated input voltage of 12Vdc transformed into higher output voltage, perhaps to connect to a 12Vdc battery to then power a 24Vdc PLC. STEP-UP units feature switch-mode technology, are DIN Rail Mountable, and have output short-circuit and overload protection. For use in industrial and automotive applications, they are particularly reliable, robust, easy to use and comply with the latest regulatory standards.

» Datasheets and Manuals Scarica File Allegati
Uninterruptible power supply output DC "All In One"

Main features:

  • Output voltage 12,24,48 Vdc even in case of power outage (shortage)
  • Output current 2,5 A ÷ 20 A even in case of power outage (shortage)
  • Automatic allocation of available power between load and battery charging up to twice-rated output current
  • Visual indication of "power shortage","defective battery", "battery voltage< 30%", "battery charging level", self-diagnostic with flashing LED code
  • Warning relays: "main or back-up" and "defective/flat battery" with galvanic isolated output contacts NO-NC
  • 3 charging levels: "boost", "trickle" and "recovery"
  • Self-diagnosis "overload", "battery sulfutation", "reverse polarity connection", "elements in short circuit", "protection against short circuit"
  • Compatible with a remote connection to select "boost" or "trickle" charging mode
  • Accessories upon request: external temperature sensors; voltage drop compensation; remote LED display
  • Compact dimensions
  • Ambient temperature operation: -10 ÷ 50° C
  • IP 20

The CBIs combine the functions of Power Supply with those of Back Up Module and of Battery Charger. They use switching technology with microcontrollers and optimize the loading and unloading times of the accumulator without a deep discharge, the switching from the battery to the charger without any interruption, automatic protection without fuse against the reserve polarity, short circuit and overload and overvoltage. They carry out diagnostic checks on the inner battery through the Life Test, enabling the users to select the most appropriate charging curve to maximize the efficiency of the system and to guarantee a long-life battery while intensifying its performances. They are equipped with relays to warn against the power outage and the defective battery. They conform to the most innovative battery management as well as electrical safety standards. They can be mounted on DIN Rails.

» Datasheets and Manuals Scarica File Allegati
The DPY351 is a robust and versatile multifunction display that allows monitoring, configuring and managing the ADELSystem devices connected in an ADELBus network. It is equipped with a high-brightness and wide viewing-angle 3.5’’ TFT screen which guarantees an optimum visibility in any operating condition. The user interface is clear, intuitive and allows configuring and managing the connected devices in a quick and straightforward way. Moreover, using the on-board Ethernet interface it is possible to remotely manage the ADELBus network through Internet with a PC or a mobile device. At the same time, the DPY351 can act as a gateway that implements standard protocols such as Modbus TCP/IP andSNMP.
What does it do?
From ADELBus network (ADELSystem network) manages all the connected devices allowing:
• Event logging: number of battery charging cycles, charge cycles completed, aborted charge cycles, Ah charged, charging time, total number of transitions stand-by / back-up etc.
• Status of Charging Battery
• Charging curve,
• Battery type,
• Limitation charging Current,
• Enabling power supply function,
• Timer…
Alarms and Recorder management
• Setting Alarm threshold,
• Receive Message from other devices,
• Event Record.
Events program, i.e. programmed actions
• Coordinated action among devices,
• Program Event to other device to change the type of charging curve,
• Checking the load output, shutdown management Reset.
» Datasheets and Manuals Scarica File Allegati

Main features:

  • Output voltage 27,5Vdc (20°C)
  • Short-circuit protection
  • Operating range in minutes
  • Small size
  • Ambient temperature operation field: 5 ÷ 40°C
  • IP20

Battery Modules are available in the following sizes: 1.2 – 3 – 7.2 and 12Ah. They have been developed to enable battery applications to be carried out in safety. For this reason, they are fitted with fuse and terminal vlock and the whole set of batteries is protected by a case.

» Datasheets and Manuals Scarica File Allegati
DFLEX Power Supply

Main Features:

  • For industrial and domestic applications
  • Wide input range: 100-240 Vac
  • Range product from 15 to 60 W
  • Protection class II
  • Wide temperature range: -25 to +70°C
  • Continuous Mode protection for Overload and short-circuit
  • DIN Rail and wall mount; Automatic Snap on
  • Extremely small size, more efficiency
  • 3 years warranty

Output Voltage:

  • 12;24 Vdc

Output Direct Current:

  • 1 phase: 0.6 - 2 - 2.8 A

Power Supply DFLEX are the best devices for industrial and domestic applications, especially suitable for applications for the automation of buildings. Ideal applications for low profile panel. Single phase input, range from 15 to 60W, in robust container. Wide range of input voltage. High temperature range from -25 + 70°C. Lower Output impedence. Operation in continuous mode, in short-circuit and overload situations. High Efficiency even at low power. Developed for mounting in: DIN Rail built in auto shooting also screw mount for wall applications without the addition of pieces.


» Datasheets and Manuals Scarica File Allegati
Flex Power Supply Units

Main features:

  • Competitive price/performances ratio.
  • 3 protective functions: Hiccup Mode, Fold Back, Restart after Main
  • Declared ambient temperature operations field: 40,50 e 60°C (suitable for any type of applications)
  • Only one product for 230-400-500 Vac
  • Standards Conformity: EN 60204-1 and EN/IEC 60529 (IP20 protection class)
  • DIN Rail Mounting
  • Extremely small size

Output Voltage:

  • 5; 12; 24; 48 Vdc

Output Direct Current:

  • 1-phase: 2 – 2,5 –5 - 7,5 – 9 -14,5 –25A
  • 2-phase: 5 –7,5 –14,5A
  • 3-phase: 25A

The FLEX range of products is characterized from 1, 2 and 3-phase input up to 500W with current rating ranging to 25A and a power flexibility that reach the 50% of the rated current In. The declared ambient temperature operations field start from 40 up to 60°C. Three short-circuit over load protections, (Hiccup Mode, Fold Back e Restart after Main), the extremely small sizes of the units and the appliance to the EN 60204-1 Safety of Electrical Equipment Machines change the way to supply power to the control panel. Besides the 1-phase 115-230Vac units we offer the 2-phase 230-500Vac units, which allows to use and store only one product.

» Datasheets and Manuals Scarica File Allegati
SUP Isolated DC/DC Converters
» Datasheets and Manuals Scarica File Allegati
Small VRLA
  • Maintenance free lead AGM, VRLA Technology
  • Output: 24Vdc 1.2, 3, 7.2, 12Ah
  • Protection: Fuse
  • Connection with screws
  • Short Circuit Protection
  • IP20
  • Wall Mount with screws
  • DIN Rail Mount
  • Small Size on the panel

Second generation of ultra-compact Battery Holders, for VRLA and LI-Ion Batteries, unique product for mounting DIN Rail and Wall mount for all models; the 12 Ah only for wall mounting. Steel Container, high battery protection, a minimum encumbrance on the DIN Rail combines the batteries overlapped. They are constantly monitored by the ADEL System DC UPS. Available in 24V.

» Datasheets and Manuals Scarica File Allegati
PSM (1-phase) Power Supply Units

Main features:

  • Ambient temperature operation field: -25 ÷ 60°C
  • IP20
  • DIN Rail Mounting
  • Extremely small size
  • Current reserve

Output Voltage:
– PSM 1-phase: 5 – 12 - 24 - 48Vdc
- PSM 2-phase: 24Vdc
Output Direct Current:
– PSM 1-phase: 1,5 – 2,5 – 5 - 7- 10A

The PSM range of products includes the following power supply units: 1-phase units, max. power 240W and current starting from 1,5 up to 10A, and 2-phase units, suitable for an input from main up to 240W and with current from 5 till 10A. These units, so important for the Adelsystem’s story in the power supply continuity field, are also available with output to 5V and 12V, suitable for complex applications and output to 48 Vdc, with specific features designed for driving control.

» Datasheets and Manuals Scarica File Allegati
SW Non-isolated AC/DC and DC/DC Converters

Main features:

  • Input rated voltage: 24 Vac, 24 Vdc, 48 Vdc
  • Output: 5 - 12 - 24 Vdc
  • Output In: 3 - 5 - 7 A
  • Non-adjustable output
  • Extremely compact dimensions
  • Ambient temperature operation field: 0 - 50° C

The SW range comprises single-output power supply units with an excellent price-performance ratio. Very small in size, these power supplies are 90% efficient. All models have short circuit and overload protection. They do not require any form of regulation.

» Datasheets and Manuals Scarica File Allegati
  • Input: Single-phase 115-230-277 Vac
  • Output: 12-24-48 Vdc
  • Temperature compensation
  • Deep Discharge protections
  • Charging curve IUoUO, constant voltage and constant current Battery Life Test function (Battery Care)
  • Three charging levels: Boost, Trickle and Recovery
  • Protected against short circuit and inverted polarity
  • Signal Output (contact free) for discharged or damaged battery, Modbus, Mains/Back-Up
  • Combined with DC UPS series
  • Wall Mount
  • Protection degree IP30
  • Space Saving

Container designed to be used as a panel of full power, can be integrated inside by the whole range of ADEL System DC UPS 12-24-48 Vdc, even with batteries up to 18Ah. Specific for application in Fire Protection systems. Designed for 2 or 3 outputs to load protected by overload and short circuit, fault indication, eliminate the deep discharge of the batteries. Compensated battery charging in temperature. Minimum dimensions, wall mounting with the possibility to distance from the wall of 1 cm. IP30 protection. Comply with EN 54-4; They are awaiting approval.

» Datasheets and Manuals Scarica File Allegati
PFAL Non-isolated AC/DC and DC/DC Converters

Main features:

  • Input rated voltage: 24 Vac, 24 Vdc, 48 Vdc
  • Output: 5 - 12 - 24 Vdc
  • Output In: 0,8 ÷ 20 A
  • Adjustable output ± 10% ±90%
  • Extremely compact dimensions
  • Ambient temperature operation field: 0 - 50° C

The PFAL range of single-output power supply units control output currents up to 20A and can guarantee stable output voltage. The entire range, designed for connection to a transformer secondary, enables both serial and parallel connections to be made. They are housed in metal cases, are DIN Rail Mountable and have short-circuit and overload protection and adjustable output.

» Datasheets and Manuals Scarica File Allegati